Dallas, Texas Apple iMac USB-C Port not working
New iMac will come with a USB-C port. It has a comparatively faster data transfer rate than USB and will be on most of the newer devices these days. But Sometimes it does not work. You try to extend the display and transfer the files but it just does not work.
if you're having trouble with your iMac's USB-C ports, you're not alone. In this blog post, we'll show you how to troubleshoot dead USB-C ports on your iMac.
First, try resetting the SMC. To do this, shut down your iMac and unplug the power cord. Then, press and hold the power button for 10 seconds. Release the button and wait a few seconds before pressing it again. This will reset the SMC.
If resetting the SMC doesn't work, try resetting the NVRAM. To do this, shut down your iMac and unplug the power cord. Then, press and hold the power button for 10 seconds. Release the button and wait a few seconds before pressing it again. This will reset the NVRAM.
If resetting the NVRAM doesn't work, try resetting the PRAM. To do this, shut down your iMac and unplug the power cord. Then, press and hold the power button for 10 seconds. Release the button and wait a few seconds before pressing it again. This will reset the PRAM.
Another issue might be the dust in the USB-C port. The USB-C port on your iMac is used to charge your computer and transfer data. The problem is that the port can collect dirt and debris, which can cause issues with charging or transferring data. Here's how you can clean it: First, turn off your iMac. Then, use a cotton swab with some isopropyl alcohol to gently wipe any visible dirt from the port. Avoid getting alcohol inside of the port itself as this will damage the hardware components. The USB-C port includes a special coating that seals it so no liquid or dust gets inside of it, but if you were to get dust into this area it could interfere with charging and data transfers. So just be sure to avoid getting dust in there when cleaning the ports on your iMac.
Comments
Post a Comment