Dallas, Texas, Custom Gaming Computer PC No Hard Drive Detected

 You are trying to boot up your PC and it says no boot drive found or no hard drive found, it could be the bios issue, failed hard drive, or loose connection. This guide will help troubleshoot the hard drive issue.




Loose connection

One of the most common reasons for a hard drive not to be detected is a loose connection. If the hard drive is not properly connected to the motherboard, the computer will not be able to detect it. This is usually due to a loose SATA cable or a loose power connector. If you suspect that this is the case, the first thing you should do is check the connection and make sure that it is secure. If the connection is tight, the next thing you should check is the hard drive itself.



Failed drive

Another common reason for a hard drive not to be detected is a problem with the hard drive itself. If the hard drive is damaged, it will not be able to be detected by the computer. This can be due to physical damage, such as a drop, or due to logical damage, such as a virus. If you suspect that the hard drive is damaged, the best thing There are a few other less common reasons why a hard drive might not be detected. 



BIOS setting

Sometimes BIOS setting is the reason why your hard drive does not show up. Refer your motherboard manufacturer for troubleshooting. Also, make sure to install all the drivers, sometimes only one hard drive will show up and the rest won’t if all the SATA drivers are not installed



Disk Management

Go to disk management and see if you can see your disk there. Some new hard drive won’t show up until and unless it is formatted.


Comments

Popular posts from this blog

Dallas, Texas Laptop Windows Restore

Dallas, Texas Laptop Windows Getting Stuck During Installation

Mac Repair Topics